At Sagafluid, we design and manufacture custom-built centralized CIP systems for the food, chemical, cosmetic, and pharmaceutical industries. From plants with multiple process lines and equipment to more compact single-line configurations, each installation is sized according to the client's layout, daily volume, and applicable regulations.
A centralized Clean-In-Place (CIP) system is a fixed installation that cleans, disinfects, and sterilizes multiple process lines, tanks, and vessels from a single location without dismantling. Unlike a portable CIP system , which is wheeled to the unit to be cleaned, a centralized system serves the entire plant via a multi-lane network that automatically selects which equipment to clean. Automatic control ensures cycle-to-cycle repeatability and complete traceability for audits.
When should you choose a centralized CIP system?
A centralized CIP makes sense when the plant meets at least one of these criteria:
- Multiple parallel process lines that require daily or shift cleaning.
- Fixed and consolidated layout , without frequent team changes.
- High production volume , where downtime for cleaning is critical.
- Requirement of continuous traceability for GMP, EHEDG, FDA, IFS or BRC audits.
- High volume of chemicals , where the recovery of caustic soda and rinse water is quickly amortized.
It is most frequently applied in food (dairy, bakery, preserves, beverages), chemical (detergents, agrochemicals, fertilizers), cosmetic (creams, soaps, personal care) and pharmaceutical (syrups, OTC, biotechnology).
How it is built
Each system consists of four blocks: service tanks (mains water, recovered water, soda and optionally acid) in sanitary AISI-316 stainless steel, pumping and heating system (steam or electric), distribution network with automatic multi-path selection, and PLC control with touch HMI and recipes configurable by equipment to be cleaned.
Each cycle runs without manual intervention: pre-rinse with reclaimed water, chemical wash with hot caustic soda at a concentration controlled by a conductivity meter, intermediate rinse, optional acid treatment, and final rinse until the complete absence of chemicals is verified before returning the equipment to production. The entire cycle is recorded (date, equipment, program, conductivity, temperature, flow rate, and time) and exported as a PDF or CSV report for GMP, EHEDG, FDA, IFS, or BRC audits.
Savings in water and chemicals
The most relevant operational difference compared to a single-pass CIP: the water from the final rinse is reused as a pre-rinse for the next cycle, and the caustic soda solution returns to its tank after each wash until its cleaning power is exhausted.
The actual savings measured in Sagafluid projects range from 30% to 50% in water consumption and from 25% to 40% in detergent consumption compared to systems without water recovery. In plants with multiple lines and daily wash cycles, the payback period for the initial additional cost compared to a simpler system is typically between 12 and 24 months.
Real project: Centralized CIP for the food sector
In a food processing plant, Sagafluid designed a combined isothermal transfer and automatic CIP cleaning installation to solve two simultaneous challenges: transferring cooking broth to a packaging machine without breaking the heat chain, and ensuring rigorous hygiene between batches with minimal human intervention, all in a very limited plant space.
The solution included a 1,000 L insulated tank with an agitator and heating element, two low-speed impeller pumps for transfer, insulated AISI-316 piping, and a centralized CIP unit with three tanks (caustic soda, acid, and recovery) equipped with automatic valves and sensors for conductivity, temperature, and level. The entire system is controlled by a single PLC with a touchscreen HMI that manages three cleaning programs tailored to the different areas of the process.
Results: reduced cleaning time thanks to automatic cycles, stable product temperature until filling, homogeneous hygiene without human variability, and a scalable system prepared for future line expansions.
Centralized CIP system vs portable: which one do you need?
| Criterion | centralized CIP | Portable CIP |
|---|---|---|
| Layout | Fixed installation, permanent piping network | Frame with wheels, the equipment moves |
| Typical capacity | 400–10,000 L per tank, multi-tank | 40–400 L, single tank |
| Lines that serve | Several in parallel (multi-way) | One at a time |
| Initial investment | High | Medium-low |
| Installation time | 6–12 weeks (civil works + assembly) | 2–4 weeks (ready to connect) |
| Ideal application | Plants with ≥2 lines, high daily volume | Specific equipment, pilot lines, small plants |
| Chemical recovery | Yes, multi-tank system | Limited or unavailable |
| PLC Traceability | Standard, audit-ready | Available in automatic version |
In medium-sized plants it is common to combine both: a centralized CIP for the main lines and a portable unit for secondary equipment or occasional cleanings outside the fixed network.
Do you need a custom-made centralized CIP system?
Tell us how many lines your plant has, your daily volume, and the applicable regulations (food, pharmaceutical, chemical). We'll design the multi-tank configuration, size the tanks and the multi-path network, and send you a technical and financial proposal.

